Inlet Valves

There are a number of types of Inlet valves on the market, from standard plastic ballvalves and float valves to electronic solenoid valves, each with its own specific qualities.

We supply a range of inlets that we believe are some of the best on the market.

Range of Inlets

Brass Equilibrium Ball Valves

These valves are Wras approved. Manufactured in brass with a Copper float suitable for mains pressure upto 5 bar and water temperatures upto 60 deg C, Available with adjustable drop arms to enable the valve to be fitted in a raised ball valve housings can be used in conjunction with Screened Spillover Weirs to provide CAT 5, Type AB airgaps where required.

Solid Brass with Threaded tank connector, Brass float and Drop arm.

Valve sizes: ½", ¾", 1", 1¼", 1½", 1¾", 2", 2½", 3", 4"

Aylesbury Float Valves

These valves are approved by WRAS. Manufactured in brass (Also available in stainless steel for K Type Valves) and incorporating ceramic discs and a puncture proof float, enables them to far outperform conventional ball float valves. Suitable for mains pressure upto 10 bar and temperatures of water upto 60 Deg C, The delayed action results in full on flow when demanded and positive shut-off when desired water level is reached.

	K Type Brass The weighted key-shaped float can be accurately set in a number of positions on the float arm, actuating the valve at a predetermined difference in water level, driving it fully open or fully closed without water hammer. Valve sizes: ½", ¾", 1", 1¼", 1½"SF, 1½"HF & 2"SF
	K Type Stainless Steel The weighted key-shaped float can be accurately set in a number of positions on the float arm, actuating the valve at a predetermined difference in water level, driving it fully open or fully closed without water hammer. Valve sizes: 3/4", 1", 1 1/4", 1 1/2" & 2"
	KX Type Brass The weighted key-shaped float with a longer float arm can be accurately set in a number of positions on the float arm, actuating the valve at a predetermined difference in water level, driving it fully open or fully closed without water hammer. Valve sizes: ¾", 1", 1¼" & 1½"SF
	KA Type Brass (KAX) Identical in operation to the 'K' Type, the Aylesbury 'KA' Type Valve has an extended drop and is suitable for use in raised valve chambers. Valve sizes: ½", ¾", 1", 1¼", 1½"SF, 1½"HF & 2"SF
	KB Type Brass The versatility of the Aylesbury 'KB' Type makes it suitable for installation either direct into a tank or into a raised valve chamber. Offers almost infinitely variable opening and closing water level settings. Valve sizes: ¾", 1", 1¼ ", 1½"SF, 1½"HF, 2"SF, 2"HF, 2½"SF & 3"RB

Solenoid Valves

These valves are Wras approved.

MORE DETAILS ON THESE VALVES WILL BE ADDED SHORTLY!!.