F&E Water Tank – 182 Litres – GRP Feed and Expansion Tanks

£413.00 Exc VAT

GRP F&E Water Tank

One Piece Insulated Storage Tank, Complete with Bolted Lid.

Manufactured to BS EN 13280, made from WRAS Approved Materials



182 Litres Nominal Capacity GRP One Piece Insulated F&E Water Tank

F&E Water Tank Manufactured to BS EN 13280, made from WRAS Approved Materials

Internal Dimensions (L x W x H): 610 x 610 x 484mm

External Dimensions (L x W x H): 710 x 710 x 506mm

Manufactured with GRP Resins that are designed to withstand water temperatures up to 90 Degrees C, finished with a Gelcoat internal surface to prevent bacterial growth and importantly helps to keep the water as clean and fresh as possible.

The tank has Insulation encapsulated into the tank walls and Lid, as a result the external finish is cleaner.
Supplied with a Flange around the top of the tank  with a Lid Sealer running around the top In addition to An Insulated Bolted Lid ensuring the prevention of light into the tank and moreover the ingress of debris and Insects.
Balance Tanks are designed to ensure that the water in the pool is kept at the correct level
Swimming pool balance tanks need to be emptied and cleaned on an annual basis, whilst spa pool balance tanks requiring cleaning on a weekly basis

Litres are Nominal Capacity (to the Brim of the Tank)

Tank Requires a Flat Fully Supported Base for the tank to sit on, this base should be as flat as possible as to not distort the tank once positioned on the base.

There is a slight Taper on the Height of the tank of approximately 20mm, therefore the top of the tank is 20mm wider than at the base.

There is a 25mm radius at the edge of each wall of the tank and also onto base.

A Usual Lead time for the tank is shown on this product, please check with us as this lead time can increase at busy times.

For more size options available on our standard tank sizes please Click Here

Additional information

Weight 20 kg

25mm Thick Insulated Tank Walls
50mm Thick Insulated Tank Walls Also Available


Internal (LxWxH) : 610mm x 610mm x 484mm
External (LxWxH) : 710mm x 710mm x 506mm

Lead Time

7-10 Days




There are no reviews yet.

Be the first to review “F&E Water Tank – 182 Litres – GRP Feed and Expansion Tanks”

Your email address will not be published. Required fields are marked *