Posted on

The Right Effluent and Waste Water Disposal

Are you disposing of your Effluent and Waste Water correctly?

New Legislation may come in to force that would impose automatic fines on water companies dumping waste in rivers and seas

Check on Gov Website to see information on Discharges to surface water and ground water to see if it effects you.

24000 litre waste water tank
24000 litre waste water Retention tank

We Manufacture GRP Effluent and Waste Water Tanks upto 100,000 Litres, that can help companies reduce the waste they are dumping down the drains.

Waste Water Tank
4000 Litre Waste Water Tank

These Tanks can then be emptied by Tankers, helping the company stay within their allowable drainage limit.

For More information on our Waste Water and Effluent Retention Tanks – Click Here

Suitable for Most Effluent and Wastes, Please contact our experienced team to discuss your requirements

Selection of Standard Tanks sizes is available here up to 100,000 litres

Bespoke Custom sizes tank are also available – Click Here

Posted on

GRP Header Tanks – Latest Information and sizes

Get latest information on our GRP Header tanks are designed and manufactured to BS EN 13280

Header Tanks Information – GRP

GRP Header Tank Information

We have a range of Cold Water GRP Header Tanks from 45 litres (10 Gallons) in many sizes up to 10,000 litres and can be manufactured up to 100,000 litres

Most Header Tanks require a small capacity so the more popular sizes are:

182 Litre, 227 Litre, 250 Litre, 318 Litre and 455 Litre

But we do have many sizes available both lesser and greater capacities to suit any requirement.

For Information on our Latest Standard Size for Header Tanks – Standard Tank Sizes

GRP Cold Water Header Tanks Information

Our Cold Water header tanks can be found here Cold Water Header Tanks, These tanks are designed just for cold water and can cope with up to 30 Deg C Max,

Again the capacities of these tanks are usually only small (less than 500 Litres) and we have many sizes to choose from to suit any application from domestic to commercial and industrial, agricultural and all other sectors.

GRP Header Tanks

if there is a size you are looking for not on the page, please contact us for help as we can supply most sizes in this range Tel: 01142166000

GRP Feed & expansion Header Tanks Information

We also produce F&E Header tanks, these tanks usually have a hot water expansion pipe running back into the tank,

These tanks are designed to store cold water yet be able to cope with water up to 90 Deg C

Our F&E Water Tanks can be found here F&E Header Tanks, if there is a size you are looking for not on the page, please contact us for help as we can supply most sizes in this range Tel: 01142166000

You can also fill out our custom Tank Enquiry Form Here

How to size a Header Tanks?

Posted on

What is a Two Piece Water Tank

What is a two piece tank?

This type of tank is know as a two piece tank as it is split horizontally half way on the internal height, giving two pieces that can be moved through smaller restricted access such as doorways easier, then bolted and sealed together once it situ. These are also know as Semi Sectional Tanks and Split Tanks.

this type of tank is also know as semi sectional and split tanks but the later should not be confused with a tank with two compartments

For More information on Two Piece Tanks Please click Here

we can also produce Special three piece tanks should the access require it

tanks can be produced up to 3m Long x 3m wide x 2.5m High,

What material are two piece tanks available in?

our two piece tanks and three piece tanks are made from WRAS Approved GRP Material, with a Gelcoat internal surface, and available with encapsulated Wall insulation.

Two piece storage tanks

Posted on

Water Tank Information

Drayton Tank GRP Water Tank Information

Water Tanks Range
 
Let go of stress and hours of internet searches to find
The Water Tank that you or your client needs
Claim back your work day  
 
 
Drayton Tanks have a Huge range of tanks, for all requirements, Custom tank sizes for everything else,
Call 08712884213.
 
We have been building our range of tanks for years, and if you need a certain size this is not an issue.  simply contact our team and we will be happy to help

Break Tanks, Balance Tanks, GRP Water Tanks, Header Tanks plus much more.

Many of our standard tanks can also be customised in many ways.
 
Standard Tanks

Custom Sizes Tanks

 
 
 
Are you ready to Gain back your work Day?
 
What’s new
 
 
Tank Overflows
Range of Overflows
Tank Overflows incorporating Insect / Rodent Screens :
Standard Overflows
Inline Overflows
End of Line Overflows
 
Break Tanks
With Many uses
GRP Water Tanks including, Cat 5, Byelaw 30 Tanks, One and Two Piece Tanks. with Custom sizes  available for all versions
 
Balance Tanks
For Swimming Pool / Spa 
standard sizes and custom sizing for all Balance tanks utilising the space available for the balance tank to be sited in most areas
Drayton Tank & Accessories Ltd
We dont just sell tanks, we help you buy them!
 

 
Built with CreativeMail
Get creative with free email marketing designed for
WordPress and WooCommerce!
Posted on

Cat 5 – Category 5 Type AB Air Gap Water Tanks Information you need to know

Water Tanks use is spilt into categories, CAT ‘1’ Being Potable wholesome water for Drinking, upto Cat ‘5’ for Tanks that can pose dangerous for human consumption, most tanks (to Byelaws (previously by-law 30) are Cat ‘3’ or higher,

Most Water Authorities are requesting tank be Cat 5, to ensure any potential contamination in the tanks cannot pass through to the mains and contaminate the area. thus a number of new tank projects request or require Cat 5 or Type AB Air gap.

For more information on Type AB Air Gap tanks please click below

Type AB Air gap Tanks – Cat 5 – Water Tanks

Posted on

Latest Information regarding Drinking water tanks Regulations

Drinking water tanks for the storage of cold water for the purpose of human consumption (aka Potable and Wholesome Water)

Tanks used for this purpose Should always be WRAS Approved, and be manufactured from WRAS approved Materials and built to BSEN 13280 Specification, This no only Ensures that no materials leech into the water and thus keeps the water clean as possible, but also ensures the tank build quality to last for many years.

For More information on WRAS (Water Regulations Advisory Scheme) please check out the link below:

https://www.waterregsuk.co.uk/