Integrated Tank Kiosk – 3000 Litres – Cat 5

£8,714.00 Exc VAT

3000 Litres Nominal Capacity GRP Integrated Tank Kiosk pump enclosure with built in tank



3000 Litres Capacity GRP Integrated Tank Kiosk pump enclosure with built in tank

GRP Integrated Kiosks Designed as a single unit with an internal full height dividing wall, with a Wet and a Dry Internal Compartments, Dry Compartment for pumps or other equipment supplied with lockable door, back boards and Louvered vents, Wet Compartment for the stored water, accessed via a Hatch in the lid, and supplied with Inlet Valve, Screened Tank Overflow Kit, Outlet connection on internal wall, and Cat 5 Type AB Air gap screened spill over weir positioned in external wall at the required height.

External Dimensions:

Length: 2690mm x Width: 1690mm x Height: 1885mm


Unit is Supplied with:

  • Lockable Single Door with louvered Vent and Door Stays
  • Lockable Access Hatch on Lid with Tank Vent
  • Insulated Tank walls and Lid
  • Encapsulated Ply Base
  • Inlet Brass Equilibrium Ball valve (BSP)
  • Screened Overflow Kit with Vent (Twice Inlet Size) (BSP)
  • Outlet on Internal Dividing Wall
  •  Screened Spill over Weir (Type AB Air Gap – Cat 5)

Wet Compartment:(Int: 1500*1500*1830mm) – 4100 Litres Nominal – 3000 Litres Actual
One internal section being WRAS Approved for the stored water with access via a lid mounted lockable manway.

The Overflow positions and The screened spillover weir are located on the side wall to outside.

Dry Compartment: (1000mm Deep)
The dry side where a booster set or other equipment can be positioned.
Access by a large hinged door with an opening of 1200 x 1575mm, door is fitted with closable louvered vents for  ventilation and a Yale Lock.
Backboards are available for wall mounting equipment

The internal dividing wall has the inlet Provision Top Left, An Outlet connection bottom Right which runs 300mm from the opposite wall on the wet side and terminates on the dry side as a spigot pipe with a Loose Flange Connection,
customer can specify placement of these connections to required,

The whole unit has a Reinforced Base Skid with positions for pipework to run down and out of the unit

offloading Customers Responsibility

WRAS Approved : made from Wras approved Materials.

Additional information

Weight 200 kg
Dimensions 2690 × 1690 × 1885 mm


There are no reviews yet.

Be the first to review “Integrated Tank Kiosk – 3000 Litres – Cat 5”

Your email address will not be published.

Product Enquiry